Home Shop Patio - Lawn & Garden Pools - Hot Tubs & Supplies Cleaning Tools & Chemicals Automatic Pool Cleaners Suction Pool Cleaners VINGLI Pool Vacuum Cleaner Automatic Sweeper Swimming Pool Creepy Crawler Vacuum with 33FT Hoses
Sale!

VINGLI Pool Vacuum Cleaner Automatic Sweeper Swimming Pool Creepy Crawler Vacuum with 33FT Hoses

Original price was: $119.99.Current price is: $98.95.

Description

Price: $119.99 - $98.95
(as of Mar 20, 2025 09:56:20 UTC – Details)

buy now Influencerstyle.co

Product Description

VACUUMVACUUM

vacuumvacuum

Clean Area Note

In order to peotect vacuum, the cleaner can work on curved surfaces but do not clean the stair on the pool.

vacuumvacuum

Cleaning Type

The pool vacuum can clean algae, dirt and dust but can not clean leaves.

vacuumvacuum

Underwater Work

Just drop into the base of pool and the max deep is 9.8ft.

VACUUM VACUUM

Product Specification

Vacuum head, blue skirt and hose size display.

HOSE HOSE

Accessories Display

Comes with ten hoses, one weight, one regulating valve, diaphragm.

If the hose is too long or too short, you can increase or reduce hose.

HOSE HOSE

Hose Diameter

Each hose diameter is 1.96 inch.

There a special hose which need to connect to pool vacuum, and other hose neen to connect with that.

HOSEHOSE

Ten Hoses

Come with 10 hoses total 33 ft, each hose is 3.3ft.

VACUUMVACUUM

White Little Weight Function

White little weight can keep balance when you clean the pool and seal the hose.

VACUUM VACUUM

Blue Disc Installation

Need to install the blue disc counterclockwise.

VACUUMVACUUM

No Air In Hoses

In order to get great usage effect, should be no air in hoses before using. Make sure the hoses in no leak and the pressure is normal.

VACUUMVACUUM

Diaphragm

The diaphragm is silent and service life is 200 hours.

Installation Notes

1.The cleaner needs to be connected to at least 3/4HP pump, it is mainly run by the suction of the pump, so when installing the various parts must ensure that the connection is tight, there can be no air leakage, otherwise the cleaner will not run normally, detailed installation steps should be carefully in the steps of the manual.

2.If suction is too large or small, need to adjust the regulating valve. If suction is too large or small, need to adjust the regulating valve.

3.If vacuum stop work when it reaches the surface of the pool,you need to adjsut regulating valve and adjust suction lower.

4.The diaphragm is the most important part of the cleaner parts, through the pulsation of the diaphragm to let the cleaner move in the pool, and let the garbage pass into the sand tank or filter inside, once the diaphragm is damaged or stuck,then it won’t work.

If the vacuum doesn’t work, please check diaphragm especially of the diaphragm mouth inside see if there is a gap inside and check if any small rock stuck in the diaphragm.

5.Any damage to accessories within one year can be contacted to the seller for reissue

Steps for Checking the Diaphragm

11

STEP 1

If you see that the diaphragm is gapped, then the suction will be poor. Then press it inward.

22

STEP 2

Pull the other side of the blue tube that connects to the diaphragm up, in order to make the diaphragm close more tightly

33

STEP 3

While pushing the blue tube down ,tighten this nut.

44

STEP 4

If the diaphragm is closed as in the picture it is normal.

NOTE:

If the vacuum doesn’t work, pls follow these suggestion:

1. Please check diaphragm especially of the diaphragm mouth inside see if there is a gap inside and check if any small rock stuck in the diaphragm.

2. If suction is too large or small, need to adjust the regulating valve.

3. If vacuum stop work when it reaches the surface of the pool,you need to adjsut regulating valve and adjust suction lower.

4.The vacuum requires at least a 3/4hp swimming pool pump or 1600ghp to function properly.If the pipe disconnects when the pump is turned on, check that the pipe joints are fitted tightly, then check for blockages, and give the cleaner a good unclogging if there are any.

Problem: This vacuum does not move or has no suction

●Check your pump, this vacuum requires at least a 3/4hp swimming pool pump or 1600ghp to function properly. If the pump power is too high, the cleaner will suck the pool floor or other places, if the pump power is too low, suction is not enough, the cleaner will also can’t work. If the pump power is as required, suction is still too large, you can adjust the regular valve (parts I).

●Check the diaphragm. Check diaphragm for damage. Or open the cleaner to see if the diaphragm is closed. The diaphragm should be closed when not in operation.

●When adjusting the regular valve(parts I), if the cleaner suction is large, you can open the regular valve to disperse the suction. If the suction of the cleaner is too small, you can close the regular valve and let the suction all pass through the water pipe.

●Be sure to fill the pipes with water. There must be water in the hoses and cleaners, and no air in it. If there is air inside the water pipe, it is also can’t work.

Problem: This vacuum doesn’t work.

First, the hose must be vented first and there must be no gas in the hose and you need make sure the hose in no leak and the pressure is normal.

●Check if the pump is ON and / or primed.

●Check Cleaner head for blockages.

●Clean and empty pump basket and empty skimmer/weir basket.

●Check the diaphragm. Check diaphragm for damage. Or open the cleaner to see if the diaphragm is closed. The diaphragm should be closed when not in operation.

●Ensure the filtration system is thoroughly cleaned. Clean sand/cartridge filters on your pool

pump as per manufacturers specifications.

●Inspect the regulator valve and flush away any debris build-up.

●Check the Mat for wear.

●Make sure the curved tips of the Mat are facing upwards.

●Ensure that the skimmer/weir vacuum lid is fitted correctly and check for cracks.

●Check the hose for blockage.

●Check the hose for leaks by lifting each section above water while pump is running.

Note:The vacuum requires at least a 3/4hp swimming pool pump or 1600ghp to function properly.
Easy to Set Up and Efficient Cleanning and Super Quietly. This pool vacuum cleaner isvery easy to assemble and install and allows you to clean your pool effortlessly andquietly, unlike some other automatic pool cleaners that make an annoying hammernoise. Low noise, create a quiet operate environment.
Great Suction Power and Can’t Stuck, This automatic pool cleaner for in-ground pools thoroughly cleans swimming pools including the walls! This pool vacuum canefficiently remove dirt, debris. Wheel Deflector for movement around tight corners.Scuff-resistant Long-Life Hoses eliminate scuffs on all pool surfaces.
Save Your Time, Make Your Life Easier. Our pool vacuum provide a quick and easy wayto clean your swimming pool, No jamming or breaking interrupting the cleaningprocess. lt keeps the pool clean, and it will cut down a lot on your time spent cleaningthe pool.
Worry-Free Guarantee . One year warranty, if any part of this item broken you cancontact us for a free replacement,We go above and beyond to provide the highestquality product. lf you have any questions or concerns about your order,please keep intouch with us, we’ll always provide you a timely and satisfying solution.
Free Hoses. Our swimming pool vacuum come with ten 3.3FT durable hoses for replacement.You can attaches this pool sweeper to your existing filtration system.The caliber of the pipe is 1.5″

Customers say

Customers find the pool vacuum offers good value for money and cleans the entire pool. It gets all the dirt off the bottom and walls, cleaning them thoroughly. They are satisfied with the ease of assembly. However, some customers dislike the traction. There are mixed opinions on functionality, build quality, suction power, and mobility.

AI-generated from the text of customer reviews

Reviews

There are no reviews yet.

Be the first to review “VINGLI Pool Vacuum Cleaner Automatic Sweeper Swimming Pool Creepy Crawler Vacuum with 33FT Hoses”

Your email address will not be published. Required fields are marked *